Translate

Sunday, June 16, 2013

Door Panels

Unfortunately, I am still waiting on parts from Al Knoch Interiors.  They have wonderful products but their shipping policy is horrible.  I found out that when multiple items are ordered they hold shipment until everything is ready.  Any specialty item that requires fabrication will prevent in-stock items from shipping.  They still owe me parts for the doors and the seats.  This is not good.

Cool Desert Nights starts Thursday night.  I can't hold off on the doors and the seats anymore so I decided to assemble the doors knowing I'll have to go back later and add missing parts.  

These are drivers side door panels.  I have to take the parts from the old panel and put them on the new.  The "hockey stick" is simple.  What's difficult is on the back side.  


On the upper part of the door panel, the right side of this picture, is a stamped steel plate that's stapled to the cardboard panel.  These are beefy staples that go through both the steel and the cardboard.  These are not easily removed and I haven't a clue how the staples would be reinstalled.


Here is the sheet metal piece.


After sand blasting and painting I did a dry fit to the door.  No issues here.


I decided to use industrial grade contact cement to bond the sheet metal to the door panel.  It's very strong.   The hockey stick and other pieces were  attached to the new panel.


After the door panel was hung I installed the window cranks, door knob, arm rest, and door lock.  I am pointing at the door lock.  This reflector twists to lock and unlock the door.  It's pretty cool.


I worked on the passenger door but I can't find the old door panel.   I don't know if it's misplaced or I never had it.  I emailed Dennis S. in Hawaii to find out if he remembers.  No luck.  Neither of us can say for sure one way or the other.  So, I am going to assemble the door knowing it has to be redone after CDN.


It looks nice but it's lacking the upper sheet metal and the hockey stick.


So, the doors are ready but the seats are not done.  Thursday night I'll take the Corvette to Dairy Queen for what many believe is the best CDN event.  Richland shuts the street down making way for hundreds of classic cars.  I'll post pictures Friday.

That's it guys.  We are almost done.

Hope to see you there Max!  You too Ty!


My Distraction

Ta-da.

2 comments:

  1. Thought Sting Ray Bicycle seats were all metallic colors???

    Wilson

    ReplyDelete
  2. Wilson,

    You may be right. I know they came mostly in white metallic but they also had black. Tuck-n-roll was also available. I upholstered the seat you see using marine vinyl from Joan Fabrics. They did not have metallic. I will probably order metallic tuck-n-roll material after CDN, but for now, the seat is comfy and close to original. Good eye!

    ReplyDelete