Translate

Showing posts with label Fiberglass Repairs. Show all posts
Showing posts with label Fiberglass Repairs. Show all posts

Monday, November 14, 2011

Knock on Wood

I should have knocked on wood when I said fiberglass issues are getting less significant. This is a blister we just noticed on top of the left fender.  We poked at it then wondered what might have caused this to occur in an area that was already repaired.

Having no fear we took our trusty die grinder and removed a pretty good area of dry fiberglass located just under a thin layer of regular fiberglass.  We decided this was from "the fire", one of several events in this cars colorful history.  This error occurred about 2 years ago when we tried to squeegee fresh resin into the fiberglass.  Soaking would have been a better solution.  Think about it for just a couple seconds and you'll agree.

The black spot is paint on the underside of the fender. 

Lots of fresh resin and fiberglass were applied and allowed to soak in and saturate.


The area was ground and sanded back to the general contour of the fender.


Then a thin layer of Bondo was applied.  Yes, it's super strong now.


On a different front, Ty took the initiative to start repairs on the 1963 hood we purchased last year.  It was found locally on Craig's List and it has issues.  But don't worry.  Ty's favorite saying is, "It's only fiberglass.", and he's right.  If it's fiberglass it can be fixed.


The hood was involved in a front end collision and it has several areas that need attention, some are shown here.  All of these areas have since been fully prepped and are now ready for fiberglass. 



And finally, this is a body line that had rounded, or softened, over the years.  The area was built back up...


then sanded back down.  The line is a little too sharp now but will be corrected when we guide coat.  That's a subject for a future post.  What's important to notice is how little Bondo actually remains.

Soon we will ask you to vote on one of three hood/racing stripe options being considered.  It's one of the reasons we are fixing that 1963 hood.

Thanks for watching.